Copyright 2017 - Woods Designs, Foss Quay, Millbrook, Torpoint, Cornwall, PL10 1EN, UK
  • home built Flica 37

  • plywood Romany 34

  • lightweight 14ft Zeta mainhull

  • Strike 15 trimaran at speed

  • 28ft Skoota in British Columbia

  • 10ft 2 sheet ply Duo dinghy

  • 24ft Strider sailing fast

  • 36ft Mirage open deck catamaran

THE FACTS AND FIGURES

sheet ply or grp flat panel hulls
strip cedar or foam sandwich round bilge hulls, ply or foam decks

LENGTH O.A. 12.2m
LENGTH W.L. 11.3m
BEAM OA 7.1m
DISPL (empty) 3.5T
DISPL (loaded) 5T
HEADROOM 1.9m min
DRAFT 1.1m
SAIL AREA 85 sq m

Rhea sail plan

Rhea's central cuddy is a feature seen on several of our more recent designs, as it combines the advantages of the open deck boat's easy access forward with the central saloon and cockpit protection of a bridge deck cabin boat.

The central cuddy is huge and a couple would really have no need to go into the hulls at all. There is even room for a small toilet/shower compartment if desired.

Rhea hull from bow

Hulls can be flat panel (below) or round bilge (above) and Rhea can be built in ply, foam sandwich or strip plank. It is the maximum size boat we suggest that a couple use for ocean cruising.


It can be built in sections and assembled by the water, so can be built inland.The Rhea below was built in Italy and sailed to Brazil and then Venezuela

For more details on Rhea click HERE

More information about this design can be obtained by purchasing a Study Plan or Partial Plan set, see the "Purchase A Design" links on the right