Copyright 2025 - Woods Designs, 16 King St, Torpoint, Cornwall, PL11 2AT UK
  • production Strider 24

  • plywood Romany 34

  • lightweight 14ft Zeta mainhull

  • Strike 15 trimaran at speed

  • 28ft Skoota in British Columbia

  • 10ft 2 sheet ply Duo dinghy

  • 24ft Strider sailing fast

  • 36ft Mirage open deck catamaran

Living in Florida, I chose to build the open deck version of the Strike 18.

As advertised, this boat is light and nimble, making it a joy for single handed sailing. The boat has seen three sailing seasons only on fresh water. With low aspect ratio keels, sailing where dagger boards fear to go is not a problem, as well as easy beaching.

The boat has plenty of room for you and a few of your friends. An extra storage compartment was built into the rear of the main hull.

The outriggers are Quattro 16 amas built for this boat. The entire boat was built new using Okoume marine plywood, Douglas fir solid framing. All plywood surfaces covered with 7 oz. Fibre Glast fiberglass and epoxy.

The spars and rigging were designed and built by US Spars. The sails, supplied by UK Sailmakers have standard rigging. The main sail 150 S.F., the jib 50 S.F.

The boat includes a Suzuki 2.5 H.P. four stroke outboard motor. The boat is trailered on a Magic Tilt aluminum trailer.



The boat is located in Tallahassee, Florida.


Asking price $15,000 O.B.O.

Contact:
John Clark
1 (850)510-0069
This email address is being protected from spambots. You need JavaScript enabled to view it.