Copyright 2024 - Woods Designs, 16 King St, Torpoint, Cornwall, PL11 2AT UK
  • production Strider 24

  • plywood Romany 34

  • lightweight 14ft Zeta mainhull

  • Strike 15 trimaran at speed

  • 28ft Skoota in British Columbia

  • 10ft 2 sheet ply Duo dinghy

  • 24ft Strider sailing fast

  • 36ft Mirage open deck catamaran


Please click on the button below if you wish to buy plans. Note: You can pay using Paypal or with your normal credit card.  

Plans will be sent as a zip file once payment has been received. This is no longer an automated system, so please allow 48 hours for your order to be processed and your plans emailed to you. 

If you have not received plans after that time please contact us at This email address is being protected from spambots. You need JavaScript enabled to view it.. We never transfer money from Paypal until your plans are ready to send out. Normally if there is a delay it is because we are away sailing. 


sheet ply stitch and glue

LOA 4.3m 14ft
LWL 4.15m 13ft 6in
BOA 2.1m 7ft
Weight 80Kgs 190lbs
SA 13.1 sq m 145sqft

one or two crew (1 trapeze)

The Quattro 14 has a hull shape similar to the PIXIE, but with the addition of small skegs (which help windward performance) and a larger, more sophisticated rig, and a trapeze for extra speed and power. Although many have been built over the years, very few builders have sent photos

As on the QUATTRO 16 aluminium tube crossbeams are used which throughbolt into the hulls forming a very rigid structure.

The QUATTRO 14 is for those who want to race, either singlehanded on the trapeze, or with two light crew (a youth trainer perhaps?)

Quattro/Pixie hull in its deck jig

A complete Materials List is supplied with the plans, but for costing purposes the following should suffice:

6 sheets 4mm (3/16in) gaboon plywood
20m 1in x 1in, 10m 11/2in x 1in, 8kgs epoxy plus fillers, screws, paint etc

Quattro 14 lines drawing